Firenzo kompact ag, Инструкция по установке и эксплуатации

Страница: 6 / 45

Kompact RU Installation Version 14/4/14 6
B HEIGHT (mm) A FROM FIRE BREAST
40mm 355mm
50mm 300mm
Minimum width of floor protector must be 820mm and/or 410mm from centre of
heater.
Before installing your Firenzo Kompact it is important to check the condition of
your masonry chimney. Ensure any cracks are sealed, loose masonry repaired
and the chimney swept.
Check the dimensions of your fireplace opening are adequate to accept the new
heater. Existing linings may need to be removed.
The heater must be installed on a level non-combustible base.
3 MANTEL CLEARANCES
If the mantel shelf on your masonry fireplace is of a combustible material the
minimum distance from the floor protector is as follows. This may be reduced if a
Firenzo Kompact deflector is fitted.
A Unprotected B With Firenzo Deflector
Kompact Diva 975mm N/A
Kompact Forte 975mm 915mm
UNPROTECTED MANTEL
MINIMUM CLEARANCE FIRENZO HEAT
DEFLECTOR FITTED
DEFLECTOR
A B
Diagram 3