FireBrick FB6402, Руководство пользователя

Страница: 25 / 196

Getting Started
8
Figure 2.3. Setting up a new user
Tip
You may also want to increase the login-session idle time-out from the default of 5 minutes, especially
if you are unfamiliar with the user-interface. To do that, tick the checkbox next to
timeout
, and
enter an appropriate value as minutes, colon, and seconds, e.g.
15:00
for 15 minutes.
Click on the Save button near the top of the screen which will save a new configuration that includes your
new user definition.
You should now see a page showing the progress of storing the new configuration in Flash memory :-
Figure 2.4. Configuration being stored
On this page there is a "Login" link (in red text)- click on this link and then log in using the username and
password you chose.
We recommend you read Chapter 3 to understand the design of the FB6000's user interface, and then start
working with your FB6000's factory reset configuration. Once you are familiar with how the user interface is
structured, you can find more detail on setting up users in Section 4.1.