manualshive.com logo in svg

FireBrick FB6402, Руководство пользователя

Поделиться
Скачать
FireBrick FB6402 Скачать руководство пользователя страница 43

System Administration

26

a replacement attribute should be used instead. A release where such an change has been made, and existing
configurations will need modifying, are termed Breakpoint software releases.

Breakpoint releases are special as they are able to automatically update an existing configuration - used with
the previous software release - so that it is compatible with the new release, and functionality is retained where-
ever possible.

When  using  the  Internet-based  upgrade  process,  the  FB6000  will  always  upgrade  to  the  next  available
breakpoint version first, so that the configuration is updated appropriately. If your current software version is
several breakpoint releases behind the latest version, the upgrade process will be repeated for each breakpoint
release, and then to the latest version if that is later than the latest breakpoint release.

On the FB6000 software downloads website, breakpoint releases are labelled 

[Breakpoint]

 immediately

under the version number.

Note

If you have saved copies of configurations for back-up purposes, always re-save a copy after upgrading
to a breakpoint issue. If you use automated methods to configure your FB6000, check documentation
to see whether those methods need updating.

4.3.2. Identifying current software version

The  current  software  version  is  displayed  on  the  main  Status  page,  shown  when  you  click  the  Status  main
menu-item itself (i.e. not a submenu item). The main software application version is shown next to the word
"Software", e.g. :-

Software     FB2901 TEST (V1.45.069 2017-09-27T08:14:40))

The software version is also displayed in the right hand side of the 'footer' area of each web page, and is shown
immediately after you login to a command-line session.

4.3.3. Internet-based upgrade process

If automatic installs are allowed, the FB6000 will check for new software on boot up and approximately every
24 hours thereafter - your FB6000 should therefore pick up new software at most ~ 24 hours after it is released.
You can choose to allow this process to install only new factory-releases, factory or beta releases, or any release,
which then includes alpha releases (if your FB6000 is enabled for alpha software - see Section 4.3.1) - refer to
Section 4.3.3.2 for details on how to configure auto upgrades.

Caution

Alpha  releases  may  be  unstable,  and  so  we  do  not  generally  recommend  setting  your  FB6000  to
automatically install alpha releases.

4.3.3.1. Manually initiating upgrades

Whenever you browse to the main Status page, the FB6000 checks whether there is newer software available,
given the current software version in use, and whether alpha releases are allowed. If new software is available,
you will be informed of this as shown in Figure 4.2 :-

Figure 4.2. Software upgrade available notification

Содержание FB6402





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды