Fiori DB 460, Руководство по эксплуатации и обслуживанию

Страница: 95 / 252

95
4
OPERATION AND USE
id.: DB 460 REV. 00 02/01/2015
Before using the vehicle, you must perform some safety checks.
Some of these checks are aimed at verifying proper vehicle operation, others involve your own safety.
Have any and all defects or malfunctions repaired by a mechanical engineer.
Before performing all checks, make sure that the parking brake is applied.
Cleanliness
- Check that the light glass covers and the rearview mirrors are clean.
NOTE: Check that the rearview mirrors are positioned so that you have the best possible visibility of the area
behind the vehicle
.
- Remove grime and dirt from the cylinders, pins and the radiator.
- Make sure that the steps and handhold are clean and dry.
- Clean all the adhesive safety labels. Replace any illegible or missing labels.
Damage
- Check that there are no damaged or missing parts.
- Check that all the articulation pins are properly in place and lubricated.
- Check the windows for any cracks or damage.
- Check that there are no oil, fuel or coolant leaks underneath the vehicle.
Check all the devices as indicated in the scheduled maintenance table in chapter 5 and make any necessary
repairs.
4.10.2 BEFORE GETTING ON THE VEHICLE (CHECKS AND WARNINGS)
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
When working on slopes, take some precautions to prevent risks to yourself and others in the vicinity. Carry
out the following checks and operations:
- Always check the working area for snow, small landslips, gravel and tilled soil which may suddenly change
the working conditions and vehicle stability.
Maximum surmountable gradient when loaded (ramps, obstacles, jerking).................................... 23° (41.6%)
Maximum permissible gradient on steep roads during transfer:
front .................................................................................................................................................... 14° (25%)
Side ..................................................................................................................................................... 4.6° (8%)
4.10.3 CORRECT USE ON SLOPES
4.10.1 CORRECT USE OF THE VEHICLE
During transfer the operator should keep the driving post turned toward the front of the machine. When driving
on public roads follow the specifi c safety rules of chapter 3.
Working in worksite the operator should proceed with the machine in transfer lay out. If it is necessary to
proceed with the turret rotated working phase (e.g. unloading operations for foundations, inability to maneuver,
etc.), ask for a person to stand on the ground who can give useful info with manual signals for delimiting an
advancement area of more than 12 m.