6
ING. O. FIORENTINI
S.P.A.
WARNING NOTE
- For cleaning or servicing the cleaner or when replacing parts, the motor should be switched off and the connecting plug be
withdrawn from the socket.
- Care should be taken to ensure that the connecting calble is not damage by being driven over, crusced, strained, etc.
- The connecting cable should be regularly checked for any signs of damage or ageing.
- The machine must not be used if the conneting cable is not in a proper condition.
- For suction of dry dust, check that the filter are in the vaccum cleaner, also for draw up liquids care to take out the filter from the
vaccum cleaner.
- Do not use foaming chemical.
- Do not clean the vaccum with a water pipe to avoid that water get trought the vaccum head.
UTILIZATION
1)
First operation before use
- Introduce the flex hoses in the hole of the machine until the click insert. Look that the seal ring is on right position.
- Put the accessory that you need on the hoses.
2)
Transport
- To avoid damage during the transport by car or by truck, the vaccum cleaner must be put inside his original package.
MAINTENANCE AND CLEANING ATTENTION
Take out the plug before any maintenance operation on the head of the machine.
NORMAL OPERATION OF MAINTENANCE:
- Clean the vaccum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT THAT IT IS DRY BEFORE TO
INSERT IN THE VACCUM AGAIN.
TROUBLE SHOOTIN
FAULT
CAUSE
REMEDY
Motor (suction turbine) does not start
No electrical power
Check fuse,cable,plug and socket
Suction slowly decreases
Filter,nozze,suction hose or extensios tube blocked Check and clean
Suction suddenly decreases
The paper filtre bag or the tank is full
Switch off the cleaner and empty
Dust ascapes when cleaning
Filter incorrectly or defective
Check filter sealing. Replace filter
WARRANTY
Warranty conditions are stated as below when not differently specified in the order confirmation.
WARRANTY OBJECT
The machine has been designed and built for a long-lasting use without relevant problems. Anyway, if problems arise during the
warranty period, FIORENTINI S.r.l. is engaged to repair or substitute for free those parts that are broken or damaged by defective
materials, working defects or imperfect assembly.
Warranty is not given for parts whose early breaking or wear and tear are due to:
•
Non-respect of instructions included in this manual;
•
Breaking and/or changes made up without FIORENTINI’s approval;
•
Not-use of genuine spare parts; Interventions made up by unauthorised personnel;
•
Missing maintenance;
•
Natural calamities.
FIORENTINI S.r.l., its purchasers and its suppliers have the same warranty for the electric and expendable materials that are
sold by external suppliers.
