Finn HydroSeeder T120GN, Руководство оператора

Страница: 14 / 87

8
3. Hose Reel. The live hose reel will mount either on the HydroSeeder
®
or on the truck frame. The 200
foot (60.96 m) capacity electric rewind reel will wind up and store empty hose. It can be electrically
connected to the HydroSeeder
®
battery.
4. Fill pumps with the capacity of 5,500 GPH (19,000 l/h) or 9,000 GPH (34,000 l/h) can either be car-
ried on the truck or mounted on the HydroSeeder
®
.
5. Hardened pump parts. Pump casing, impeller, and suction cover treated with special material designed
to resist wear.
6. Rear spray bar. The spray bar option is not designed for slurry application but for the dispersion of
liquids for dust control, watering, feeding and washing applications. Rear spray bar can be arranged so
that operation is remotely controlled from the truck cab.
PRE-START CHECK:
Safety check to insure operator safety:
1. A. Skid Unit - Check condition of all mounting hardware securing HydroSeeder
®
to truck frame rails.
B. Trailer Unit - Inspect hitch, safety chains, lights, brakes and breakaway switch.
2. Make sure bag cutter is in place and secure.
3. Inspect that all railings are in place and secure.
4. Insure that all guards are in place.
EqUIPMENT CHECK:
CAUTION: Equipment check is made with the engine off and all rotating
parts stopped.
1. Verify that the tool kit contains all the prescribed items (see tool kit list in parts section, page 79).
2. Inspect the “slurry-tank” for foreign objects. See numbers 2 and 3 in Maintenance Section (IV) of the
Safety Summary Section, page 4.
3. Check fuel level.
4. Check the hydraulic oil level (see hydraulic system page 21 for oil specifications).
5. Check engine oil level. For oil type refer to the engine manual.
6. Check fluid level in radiator and overflow tank.
7. Inspect air cleaner for dust and dirt, clean if necessary.
8. Secure the drain plug on the outside-bottom of the slurry-tank.
9. Check to be certain pump drain plug is in place.
10. Verify that the suction line shut-off valve is completely open.
11. Engage and disengage clutch to determine if it “snaps” in and out.