4
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always
give the model, the version and serial number written on the serial
number plate.
TECHNICAL DESCRIPTION
INTENDED USE
SAFETY
SERIAL NUMBER PLATE
The
Genie XS
is a scrubbing machine that is able to clean a wide
range of flooring and dirt types by means of the mechanical action
of the discoidal brush and the chemical action of a water-detergent
solution. As it advances, it also collects the dirt that has been
This scrubbing machine was designed and built for the cleaning
(scrubbing and drying) of smooth, compact flooring in the
commercial, residential and industrial sectors by a qualified operator
in proven safety conditions. The scrubbing machine is not suitable
for cleaning rugs or carpets. The appliance is only suitable for use in
indoor - or at least covered - areas.
Operator cooperation is paramount for accident prevention. No
accident prevention programme can be effective without the full
co-operation of the operator who is directly responsible for machine
operation. The majority of occupational accidents that happen both
in the workplace or whilst moving are caused by failure to respect
The serial number plate is located on the inside of the appliance in
the front end of the frame, indicating its general characteristics (in
particular, the serial number). The serial number is a very important
piece of information and should always be provided together with any
request for assistance or when purchasing spare parts.
ATTENTION:
The appliance is not suitable for use in the rain,
or under jets of water.
IT IS FORBIDDEN
to use the appliance for picking up dangerous
dusts or inflammable liquids in places with an explosive atmosphere. In
addition, it is not suitable as a means of transport for people or objects.
the most basic safety rules. An attentive, careful operator is most
effective guarantee against accidents and is fundamental in order to
implement any prevention programme.
removed and the detergent solution that has not been absorbed by
the floor.
The appliance must only be used for this purpose.
Design by FIMAP Verona (Italy)
Assembled in FIMAP Verona (Italy)
Via Invalidi del Lavoro, 1 S. Maria di Zevio - Verona - Italy
