Fimap 109070, Руководство по обслуживанию

Страница: 22 / 104

2.4 Frame and traction system: what to do if. . .
The traction motor doesn’t work properly
1. The machine is switched off
⇒
Switch on the machine.
2. The machine doesn’t switch on
⇒
Check the proper section
(see section 2.1 at page 17 )
.
3. The display shows an alarm message
⇒
Check what alarm message is shown and solve
the related issue by following the proper instruc-
tions
(see section 3.4.1 at page 34 )
.
4. The operator is not sitting on the seat
⇒
The operator must sit on the seat.
5. The operator is sitting on the seat ⇒ Check and/or replace the seat
(see section 3.3 at
page 27 )
.
6. The pedal is not pressed
⇒
Press the pedal depending on the required speed.
7. The pedal is pressed
⇒
Check and / or replace the traction pedal
(see
section 3.3 at page 27 )
.
8. The traction motor is not supplied
⇒
Check the power connections of the motor
(see
section 8.5 at page 90 )
.
9. The traction motor carbon brushes are worn out
⇒
Replace the carbon brushes
(see section 8.7.3 at page
93 )
.
10. The traction motor is not working even if pow-
ered ⇒ Replace the motor
(see section 3.3 at page 27 )
.
11. The electrobrake doesn’t disengage
⇒
Check the connections of the electrobrake.
22