3.4.2
Function Alarms
Id Alarm
Meaning
Solution
AL 41
Function
Overtemperature
The temperature of the functions power mosfets exceeds 90
°
C.
Switch off the machine, wait for the cooling and then switch on
again.
AL 42
Function
Powerstage failure
Verify the machine model setting, turn it off and on again. If the
problem persists, replace the main card.
AL 43
Function
Main fuse failure
Check the Function fuse. If the problem persists, replace the main
card.
AL 44
Function
Main relay failure
Replace the main card.
AL 45
Function
Main relay failure
CC
Replace the main card.
AL 46
Function
Overcurrent brush
motor 1-2-3
Brushes Short Circuit.
Check the connections, if the problem
persists, replace the main card.
AL 47
Function
Overcurrent
vac-
uum motor 1-2
Vacuum Short Circuit. Check the connections, if the problem
persists, replace the main card.
AL 48
Function
Overcurrent pump
Pumps Short Circuit. Check the connections, if the problem per-
sists, replace the main card.
AL 49
Function
Brushes motor 1
Ammeter
Overcurrent of the Brush Motor (BMG 56)
AL 50
Function
Brushes motor 2
Ammeter
Overcurrent of the Left Brush Motor (BMG 65)
AL 52
Function
Vacuum motor 1
Ammeter
Overcurrent of the Vacuum Motor.
AL 54
Function
Brush Motor 1
not connected
Detected Motor Brush XE1 not connected, check the connections,
if the problem persists, replace the function card.
AL 55
Function
Brush Motor 2
not connected
Detected Motor Brush XE2 not connected, check the connections,
if the problem persists, replace the function card.
AL 57
Function
Suction Motor
not connected
Detected Motor Aspiration XD not connected, check the connec-
tions, if the problem persists, replace the function card.
AL 59
Function
Unbalanced Brush
Deck
On 65 version, if the current difference absorbed by Brushes 1 and
2 remains greater than 8A for 10 seconds.
35
Содержание 109070
