Fimap 109070, Руководство по обслуживанию

Страница: 91 / 104

Functionality Check - Traction Unit
Conventions:
ˆ
+ V
b
: Positive voltage of the battery.
ˆ
−
V
b
: Negative voltage of the battery.
ˆ
The emergency button is not pressed, the key contact is closed and the charger is not connected to the
mains.
ˆ
The Traction is in working condition .
Input/output:
Satisfied condition Pin V at work V at rest
Display Negative J1(4) ref to B-
−
V
b
−
V
b
Display Transmitting J1(7) ref to B- + V
b
−
V
b
Display Receiving J1(3) ref to B- + V
b
−
V
b
Display Positive J1(8) ref to B- + V
b
+ V
b
Electrobrake Activated J2(1) ref to J2(2) + V
b
−
V
b
Encoder activated J4(1) ref to B- + V
b
− V
b
Encoder activated J4(4) ref to B- + V
b
−
V
b
Encoder activated J4(5) ref to B- + V
b
−
V
b
Encoder activated J4(6) ref to B- + V
b
−
V
b
Brake pedal pressed J5(3) ref to J5(6) + V
b
−
V
b
Potentiometer Activated J5(2) ref to J5(4) + V
b
−
V
b
Potentiometer Signal Activated J5(5) ref to J5(4) + V
b
− V
b
Curve Speed red. Microswitch J7(6) ref to J7(1) + V
b
−
V
b
Seated Operator J7(15) ref to J7(1) + V
b
−
V
b
Backward activated J7(11) ref to J7(16) + V
b
−
V
b
Spray Gun activated J7(18) ref to J1(8)
−
V
b
+ V
b
Wand activated J7(19) ref to J1(4)
−
V
b
+ V
b
Gearmotor activated XB(1) ref to XB(2) + V
b
−
V
b
J1 J2
J4 J5
J7
8.5.1 Relative electrical Components
Traction Gearmotor
The traction of the machine is guaranteed by an electric motor installed in combination with a gear reducer,
which acts directly on the rear wheels of the machine, ensuring traction. With constant 36 V DC power supply
(battery charged) the traction gearmotor with no load (M1) absorbs 2.1 Amps
±
0.1. With constant 31 V DC
power supply (low battery) the absorption is 2.0 Amps
±
0.1.
91