88
FCP-75 Manual —
P/N LS10147-003FK-E:A 3/17/2021
Programming
Group
5.
Enter the number of the zone you wish to view, then press ENTER.
Figure 9.3 View Zone Points Screen
9.4 Group
An Output Group is made up of output points that have been programmed to respond in the same way. Output Groups simplify programming
because you do not have to program each individual point. Once you have defined the characteristics of Output Groups, you can assign each
point to the appropriate group. Up to 125 Output Groups can be defined.
9.4.1 Edit Group
In the edit group option you can program the name of an Output Group (Section , "Edit Group Name") and change the properties of that
group.
To edit a group, follow these steps:
1.
Enter the Installer Code.
2.
Select 7 for Program Menu.
3.
Press 3 to enter Group Menu.
4.
Press 1 to edit group.
5.
Enter the number of the group you wish to edit, then press ENTER.
Edit Group Name
6.
To edit the group name, press 1.
You can use words to display a descriptive name for a group.
Edit Group Properties
7.
To edit the group properties, Press 2 from the edit group Menu.
The Edit Group Menu allows you to select options for each group for the following items:
•
Template Override: Y or N
•
When Template override is Yes. Template Override Cadence is available.
•
See Section 9.4.3 for more information.
Figure 9.4 Group Properties Screen Programming Options
9.4.2 View Group Points
1.
Enter the Installer Code. The panel will automatically go to the Main Menu.
2.
Select 7 for Panel Programming.
3.
Press 3 to enter group Menu.
4.
Press 2 to view group points.
NOTE:
See Appendix B for editing names
