3-7
3
Connecting to the network
3.
Configure Setup options.
It is the network administrator’s responsibility to configure Setup according to the
network and user environment. Refer the network administrator to the
Configuration
Guide
for Setup information.
4.
After configuring Setup options, verify the network connection.
Once the network connection has been made and the Print Controller X4(AR-PE1) has
the correct Setup configuration, the Print Controller X4(AR-PE1) should be available on
the network.
The network administrator should perform any additional network setup, verify the
network connection, verify that the Print Controller X4(AR-PE1) appears in the list of
printers, and print a few test documents from a networked computer that will use the
Print Controller X4(AR-PE1). (See the
Configuration Guide
for more information.)
