Fieldmann FZN 4002 B, Руководство пользователя

Страница: 18 / 27

EN
PETROL-POWERED HEDGE TRIMMER USER'S MANUAL
19
Maintenance
Clean the surface of the spark plug. Take out the
spark plug and check the electrode gap. Set the
gap to 0.6 - 0.7 or replace the spark plug. Check
that the cable socket is seated on the spark plug.
X
Clean the cooling system of the power tool. X
Clean the surface of the carburettor and the
area in its vicinity.
X
Check that the fl ange, guard and nuts are
correctly assembled and tightened.
X
Clean the fuel tank. X
Check all cables and connections. X
Check the clutch, clutch springs and clutch
basket for wear. If necessary, have it replaced
at an authorised service centre.
X
Replace the spark plug. Check that the cable
socket is seated on the spark plug.
X
Remove dirt, leaves and excess lubricant from
the exhaust muffl er and engine to reduce the
risk of causing a fi re.
X
MAINTENANCE must be performed
at REGULAR INTERVALS during the
specifi ed periods or after a certain
number of operating hours (time
based).
(1)
Always before
use
Every month or
after 25 hours
of operation
Every 3
months or
after 50 hours
of operation
Every 6
months or
after 100
hours of
operation
Air fi lter Clean X
(1)
Valve movement Check - clean X
(2)
Fuel tank and fuel
fi lter
Clean X (2)
Lubricant inside
the gearbox
Fill up X
(1)
Blades
Check (replace if
necessary)
X X
Fuel lines
Check (replace if
necessary)
Every three years
(2)
(1)
If the power tool is used in dusty areas, shorten the maintenance intervals.
(2)
If the owner does not have the required tools and knowledge, it is necessary to have this maintenance
performed at an authorised service centre.