Fidelity Measurement DC-10, Руководство по эксплуатации

Страница: 33 / 97

33
Numbers, Letters, Symbols Assignment Table
Key Assignment
0 0 Space
1 1 - / _
2 2 A B C
3 3 D E F
4 4 G H I
5 5 J K L
6 6 M N O
7 7 P Q R S
8 8 T U V
9 9 W X Y Z
Check Shift
10. Count Function
Before count transaction / process: -
1.
Remove all loads from weighing platform.
2.
If zero weight cannot be obtained when unloaded, press [Zero] . After [Zero] is pressed, the Zero
Indicator will appear.
3.
If a container is needed, place it onto the platform and press [Tare] manually (in case auto tare is not
enabled).
10.1 Obtain Unit Weight
Average Piece Weight is the basic of all piece count transaction / process. Average Piece Weight can be created
and obtained through one of the below methods: -
a.
Direct unit weight entry method.
b.
Sampling method.
c.
Employ last unit weight when power on
d.
Recall from quick PLU.
10.1.1 Direct unit weight entry method
This method is used when unit weight is known. Procedures: -
1.
During normal operation status, enter the unit weight through numeric keys, then press [@WT].
2.
Unit weight entered is then displayed on LCD3
10.1.2 Sampling method
This method is used when the unit weight is not known. Procedures: -
1.
Apply samples with known quantity on weighing platform.
2.
Enter quantity through numeric keys, then press [@QTY] .
3.
Calculation unit weight is then displayed on LCD3.