27
Cursor location of current entry is indicated by flashing. Default setting for letter entry is upper case, to change
to lower case letter, press
[Check]
. When inputting upper case letters, OK Indicator will appear.
6.10.1 Enter a customer & product code manually
19
1.
Go to customer/product code setting manual by either one of the below method.
•
If Quick Manual Code Entry function (PCd) in F11 is set to on: -
◼
Press
[FUNC/SET]
until C.P. Code appears then press
[PRINT/M+]
.
◼
Press
[FUNC/SET] or [MR/UNIT]
until the desired mode appears (select C Code to enter
customer code or select P Code to enter product code), then press
[PRINT/M+]
to confirm.
•
If Quick Manual Code Entry function (PCd) in F11 is set to Off: -
◼
Go to F19, then press
[PRINT/M+]
.
◼
Press
[FUNC/SET]
or
[MR/UNIT]
until the desired mode appears (C Code for customer
code, P Code for product code), then press
[PRINT/M+]
to confirm.
2.
Instrument displays H code followed by the 1st 6 digits. Enter the first 6 digits of the code here,
then press
[PRINT/M+]
to confirm.
3.
Instrument displays M code followed by the 2nd 6 digits. Enter the 7th ~ 12th digits of the code
here, then press
[PRINT/M+]
to confirm.
4.
Instrument displays L code followed by the 3rd 6 digits. Enter the last 6 digits of the code here, then
press
[PRINT/M+]
to confirm.
5.
Instrument displays
PLu=?
. At this point: -
•
Press the preferred PLU position (numeric key 0 ~ 9), then press
[PRINT/M+]
to save to that
PLU position or
•
Press
[PRINT/M+]
to utilize the code immediately but without saving to PLU, or
•
Press
[ZERO]
to quit.
6.
To go to other internal function, press
[MR/UNIT]
or
[FUNC/SET]
or press
[ZERO]
to quite to
operation status.
19
If a customer/product code is less than 18 digits, press
[Print/M+]
to skip all blank digits displayed until instrument return to F19.