21
•
Lab 4 = Journal output format with gross and net weight of each individual transaction. This format
supports weighing, piece count and ATM mode only. Refer to
5.5.3.3
for other settings.
•
Lab 5 = Journal output format with time and net weight of each individual transaction. This format
supports weighing, piece count and ATM mode only. Refer to
5.5.3.3
for other settings.
•
LP-50 = Output to LP-50 label printer. Refer to
5.5.3.4
for other settings.
•
TSC = Output to TSC label printer. Refer to
5.5.3.4
for other settings.
5.5.3.1 Other settings if Lab 1 is selected
1.
Instrument displays Line number. Line number is the number of lines in between which the report
heading is repeated. Line number should be from 00~99. 00 means no header output. Input the
desired line number then press
[PRINT/M+]
to save.
2.
At this point, Lab 1 setup is completed.
5.5.3.2 Other settings if Lab 2 is selected
1.
Instrument displays number of copy to generate each time. 8 parameters (1~8) are available. Press
[FUNC/SET]
or
[MR/UNIT]
until the preferred parameter appears then press
[PRINT/M+] t
o save.
2.
At this point, Lab 2 setup is completed.
5.5.3.3 Other settings if Lab 4 / Lab 5 is selected
1.
Instrument displays current statistic data output
4
(Sd) setting (On / Off). When Sd is set to On, the
below statistical results will also be transmitted.
•
Max = Maximum Value
•
Min = Minimum Value
•
Diff = Differentiation (Max – Min)
•
X = Mean (Average)
•
Sd = Standard Deviation. Formula used:
•
Srel = Relative Standard Deviation
2.
Press
[FUNC/SET]
or
[MR/UNIT]
until the preferred parameter appears then press
[PRINT/M+]
t
o save.
3.
At this point, Lab 4 / Lab 5 setup is completed.
5.5.3.4 Other settings if LP-50 / TSC is selected
1.
Instrument displays number of copy to generate each time. 8 parameters (1~8) are available.
Press
[FUNC/SET]
or
[MR/UNIT]
until the preferred parameter appears then press
[PRINT/M+]
to save.
2.
Instrument displays label file number (FL1 01 ~ FL1 99) to print in label format group 1. Press
[FUNC/SET]
or
[MR/UNIT]
until the preferred label file number appears then press
[PRINT/M+]
to save.
3.
Instrument displays label file number (FL2 01 ~ FL2 99) to print in label format group 2. Press
[FUNC/SET]
or
[MR/UNIT]
until the preferred label file number appears then press
[PRINT/M+]
to save.
4.
At this point, LP-50 / TSC setup is completed.
4
Statistic data output calculates weight data only extra statistic data will be output if Sd is set to On.
