25
2.
Enter preset tare value through numeric keys then press and hold
[Tare]
for 2 seconds.
3.
Instrument displays
Save =?
. At this point: -
•
Press the preferred PLU position (numeric key 0 ~ 9), then press
[Print/M+]
to save to that PLU
position, or
•
Press
[Print/M+]
to utilize this preset tare immediately but without saving to PLU, or
•
Press
[Zero]
to quit.
6.11.3.2 Recall preset tare from PLU
Follow the below steps to recall preset tare value.
1.
Select desired operation mode and weight unit, then press and hold
[Tare]
for 2 seconds.
2.
Instrument displays
PT =?
. Press PLU position (numeric key 0 ~ 9) then press
[Print/M+]
to recall the
preset tare value stored in that position.
3.
Preset tare value stored is now effective.
6.11.3.3 Clear preset tare from PLU
Refer to
6.11.3.1
. Enter zero value in step number
2
. Then press the preferred PLU position to clear.
6.11.4 Customer / product code PLUs
6.11.4.1 Save customer/product code to PLU
Refer to
6.10.1
for procedures to save a customer/product code to PLU.
6.11.4.2 Recall a customer / product code from PLU
Follow the below steps to recall a customer/product code from PLU.
1.
Select desired operation mode and weight unit, then press and hold the PLU position (numeric key 0
~ 9) then press
[Print/M+]
to recall the product or customer code stored in that position.
2.
Press
[Func]
or
[Unit]
until the desired mode appears (select C Code for customer code or select P
Code for product code), then press
[Print/M+]
to confirm.
3.
Code stored is now effective.
6.11.4.3 Clear customer / product code from PLU
Refer to
6.10.1
and enter blank value for all H, M and L codes in step numbers
2
,
3
and
4
. Then press the
preferred PLU position to clear.
Содержание 19eA
