Fidelity Electronics 19eA, Руководство по эксплуатации

Страница: 30 / 62

30
e.
Start measuring process, the peak value detected will be held and flashing.
f.
To print the peak value, press [Print/M+] .
g.
To display actual current value (e.g. after a tension force has been decreased), press [CE/x10] .
11. Animal Weighing Mode
35
11.1 Description of Animal Weighing Mode
Animal weighing mode is used to weigh live animals.
11.2 Basic Animal Weighing Settings
a.
Refer to 6.6 on how to select the desired weight unit.
b.
Enter Animal Weighing mode.
c.
Press [Set] to select the preferred filter speed by pressing [Func] or [Unit] key, 5 filter speed are
available from (FLt 1 ~ FLt 5).
•
FLt 1 = Fast (Weight value is based on least number sampling data, accuracy will be lowest).
•
FLt 3 = Normal (Displayed average weight is calculated based on the last 8 internal readings).
•
FLt 5 = Slow (Weight value is based on most number of sampling data, accuracy will be highest).
d.
Press [Print/M+] to save and set weight release variation value.
e.
Press [Func] or [Unit] key to select the preferred weight release variation value. 10 parameters
are available from Off to 20): -
•
rE oFF = auto release disabled.
•
rE 2 = auto release when weight varies ≥2% of rate capacity or W1 for dual weighing range/interval
mode).
•
……….
•
rE 20 = auto release when weight varies ≥20% of rate capacity (or W
1
for dual weighing
range/interval mode).
f.
Press [Print/M+] to save.
g.
Instrument is now ready for animal weighing application.
11.3 Start using Animal Weighing
a.
Get an animal on platform.
b.
This instrument will calculate the weight of an animal. The result obtained will be flashing.
c.
In case more animals have to be weight in the same transaction, then get other animals on platform.
An updated weight will be calculated and displayed
36
as above step b .
d.
To update the weight reading manually, press [CE/x10] .
35
Animal Weighing function will not operate when weight is less than 20d (or 20d
1
for dual weighing range/interval).
36
Provide that extra weight added/removed fulfills the weight release variation value listed on point 5 of 11.2.