![FIC MB05W Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/fic/mb05w/mb05w_service-manual_2286939036.webp)
FIC MB05W Service Manual
1-36
FIC MB05 Service Manual
−
Hold the DIMM at a 60-degree angle and align the DIMM connector with the
socket in the system. Push the connector into the socket.
−
Press down on the edge of the DIMM until the locking tabs on the sides snap into
place, securing the module.
4. To remove a DIMM, press the locking tabs away from the sides of the module until the
module pops up. Then, remove the DIMM.
5. Reassemble the notebook components as follows.
−
Put the DIMM door back.
−
Replace the screw and turn the system over.
2.3.4
Hard Disk Upgrade Procedure
The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an
industry standard 2.5
”
IDE disk drive and can be upgraded with another standard 2.5
”
HDD.
1. Make sure the system is powered off and that no peripheral devices are attached.
2.
Remove the one screw.
Figure 2-9 Removing HDD module
3. Remove the HDD module from the base unit.
4. Remove four screws of frame HDD bracket plate.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com