Fiat Linea, Руководство пользователя

Страница: 31 / 234

30
SAFETY
ST
AR
TING UP
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICING
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
IN AN
EMERGENCY
Scheduled Servicing (Service)
Using this function you can display infor-
mation about the mileage intervals for car
servicing.
To consult this display, proceed as follows:
– briefly press MENU ESC – service in-
tervals in km or mi, depending on the pre-
vious setting, will be displayed (see
“Measurement units” section);
– briefly press MENU ESC to go back to
the menu screen or hold the button down
to go back to the standard screen.
Note The “Scheduled Servicing Plan”
requires the car to be serviced every
30,000 km (or 18,000 mi) or every 20,000
km (for versions/markets, where pro-
vided); this indication will appear auto-
matically with the key at
MAR when there
are 2,000 km left (or 1,240 mi)
and will be displayed automatically every
200 km (or 124 mi). Below 200 km ser-
vicing indications are more frequent. The
display will be in kilometres or miles de-
pending on the measurement unit settings.
When the next scheduled servicing is ap-
proaching (“coupon”), the message “Ser-
vice” will appear on the display followed
by the number of kilometres or miles left
when the key is turned to
MAR . Contact
a Fiat Dealership to carry out any service
operation in the “Scheduled servicing
plan” and to reset the display.
Adjust the button volume
(Button Vol.)
This function may be used to adjust (over
8 levels) the volume of the noise made
when the
MENU ESC , + and − buttons
are pressed.
To set the desired volume, proceed as
follows:
– briefly press MENU ESC – the pre-
viously set volume level will flash on the
display;
– press the button + or − for setting;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
001-031 LINEA 1ed GB:001-031 LINEA 2ed it 5-11-2010 12:21 Pagina 30