141
SAFETY
IN AN
EMERGENCY
SER
VICING
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
ST
AR
TING UP
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
GENERIC WARNING
(amber)
The warning light turns on in the
following circumstances.
Engine oil pressure
sensor failure
The warning light turns on when failure is
detected in the engine oil pressure sensor.
Contact a Fiat Dealership to have the fail-
ure fixed as soon as possible.
Exterior lights failure
(for versions/markets where provided)
See the section on warning light
6
.
Fuel cut-off switch tripped
The warning light comes on when the in-
ertial fuel cut-off switch is triggered.
The display will show the dedicated mes-
sage.
Rain sensor failure
(for versions/markets where provided)
The warning light comes on when a rain
sensor failure is detected. Go to a Fiat
Dealership.
The display shows the dedicated message.
è
Parking sensor failure
(for versions/markets where provided)
See the section on warning light
t
.
Speed limit exceeded
(for versions/markets where provided)
The display shows the associated message
when the car exceeds the set speed limit
(see “Multifunction display” in the “Dash-
board and controls” section).
Diesel filter sensor failure
(for versions/markets where provided)
The warning light will come on when a
diesel filter system failure is detected. The
display shows the dedicated message (for
versions/markets, where provided).
Diesel particulate filter clogged
(MultiJet versions)
The warning light turns on when the diesel
particulate filter is clogged and the driving
conditions do not allow the regeneration
procedure to be activated automatically.
To allow the regeneration procedure,
keep the car running until the warning light
turns off.
The display shows the dedicated message.
DPF (DIESEL PARTICULATE
FILTER) CLEANING
IN PROGRESS
(only MultiJet versions with DPF –
amber)
Rotating the key to
MAR
the warning
light (for versions/markets where pro-
vided) comes on (on some versions the
symbol
è
is shown along with a message
on the display), but it should switch off
after a few seconds. The warning light (or
the symbol on the display) switches on
constantly to notify the driver that the
DPF system needs to eliminate captured
pollutants (particulate) by the regenera-
tion process. The warning light (or the
symbol on the display) does not come on
during every DPF regeneration, but only
when driving conditions require that the
driver is notified.
To switch off the warning light (or the
symbol on the display), the car must be
kept in motion until regeneration has been
completed. As an average, the process
lasts fifteen minutes.
Optimal conditions for completing the
process are achieved by travelling at 60
km/h with engine revs above 2000 rpm.
133-144 LINEA 1ed GB:133-144 LINEA 2ed it 5-11-2010 9:46 Pagina 141
Содержание Linea
Страница 222: ...page intentionally left blank 201 226 LINEA EUROPA 2ed GB 201 221 LINEA 1ed it 28 03 2012 16 29 Pagina 221 ...
Страница 226: ...N NO OT TE ES S 201 226 LINEA EUROPA 2ed GB 201 221 LINEA 1ed it 28 03 2012 16 29 Pagina 225 ...
Страница 227: ...201 226 LINEA EUROPA 2ed GB 201 221 LINEA 1ed it 28 03 2012 16 29 Pagina 226 ...