Fiat Linea, Руководство пользователя

Страница: 27 / 234

26
SAFETY
ST
AR
TING UP
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICING
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
IN AN
EMERGENCY
To cancel the setting, proceed as follows:
– briefly press MENU ESC : (On) will
flash on the display;
– press the button − : (Off) flashes on the
display;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Rain sensor sensitivity adjustment
(Rain sensor)
(for versions/markets, where provided)
This function allows you to adjust the rain
sensor sensitivity to 4 levels.
To set the required sensitivity level, pro-
ceed as follows:
– briefly press the button MENU ESC ,
the previously set sensitivity “level” will
flash on the display;
– press the button + or − for setting;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Speed limit (Speed Beep)
This function is used to set the car speed
limit (km/h or mph); the driver is imme-
diately alerted when this limit is exceeded
(see chapter “Warning lights and mes-
sages”).
To set the desired speed limit, proceed as
follows:
– briefly press MENU ESC – the display
will show the wording (Speed Beep);
– press button + or − to select speed limit
activation (On) or deactivation (Off);
– if the function has been activated (On),
press buttons
+ or − to select the re-
quired speed limit and then press MENU
ESC to confirm.
Note The speed may be set in the range
from 30 to 200 km/h, or from 20 to 125 mph
according to the previously chosen unit (see
“Setting the distance unit” paragraph ) de-
scribed below. The setting will in-
crease/decrease by five units each time the
button
+ / − is pressed. Hold the button + / −
pressed to increase/decrease the setting
rapidly and automatically. Complete the set-
ting by briefly pressing the button when you
approach the required value.
– briefly press the button MENU ESC to
return to the menu screen or hold the
button down to return to the standard
screen without saving.
Headlight sensor
(Automatic headlight sensitivity
adjustment)
(for versions/markets where provided)
This function is used to adjust the dusk
sensor sensitivity to three levels (level 1
= minimum, level 2 = medium, level 3 =
maximum); the higher the sensitivity, the
lower the amount of external light needed
to switch the headlights on.
Proceed as follows to set:
– briefly press the button MENU ESC ,
the previously set level will flash on the
display;
– press the button + or − to select;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
001-031 LINEA 1ed GB:001-031 LINEA 2ed it 5-11-2010 12:21 Pagina 26