Fiat 500x, Руководство пользователя

Страница: 122 / 272

STARTING AND DRIVING
120
(white on versions with reconfigurable
multifunction display), together with a
dedicated message and the last speed
value stored.
DEVICE
ACTIVATION/
DEACTIVATION
Device activation: press the SET + or
SET
–
buttons.
The activation of the device is signalled
by the displaying of the symbol
(green on reconfigurable multifunction
display).
Device deactivation: press the CANC
button. The deactivation of the device
is signalled by the symbol on the
display (white).
Device reactivation: press the RES
button.
DEACTIVATING THE
DEVICE
The device deactivates automatically in
the event of fault in the system. In this
case, contact a Fiat Dealership.
ELECTRONIC
CRUISE CONTROL
This is an electronically controlled
driving assistance device that
allows the desired car speed to be
maintained, without having to press
the accelerator pedal. This device can
be used at a speed above 30 km/h on
long stretches of dry, straight roads
with few variations (e.g. motorways).
It is therefore not recommended to use
this device on extra-urban roads with
traffic. Do not use the device in town.
ACTIVATING THE DEVICE
122) 123) 124)
To activate the device press button (A)
fig. 98.
Activation of the device is indicated by
the symbol on the display switching
on and, on some versions, by a
dedicated message.
If the Speed Limiter is activated, button
(A) fig. 98 must be pressed twice to
activate the Cruise Control (because
the first press deactivates the Speed
Limiter, and the second press activates
the Cruise Control).
98
F1B0727
The device cannot be engaged in 1st
gear, reverse gear or neutral: it is
advisable to engage it in 3rd gear or
higher.
IMPORTANT It is dangerous to
leave the device on when it is not in
use. There is a risk of inadvertently
activating it and losing control of the
car due to unexpected excessive
speed.
SETTING THE DESIRED
SPEED
Proceed as follows:
to activate the device press button
(A) fig. 98;
when the car has reached the
desired speed, press button SET +
(or SET
–
) and release it to activate
the device. When the accelerator is
released, the car will keep the selected
speed automatically.