Fiat 500x, Руководство пользователя

Страница: 84 / 272

SAFETY
82
65
F1B0382C
IMPORTANT When returning the rear
seat from the tilted position to the
normal operating position, take care
to refit the seat belt correctly, in order
to guarantee prompt availability every
time.
ADJUSTING THE SEAT
BELT HEIGHT
72) 73)
Five different adjustments in height are
possible.
To carry out window height adjustment,
from the top to the bottom, buttons (A)
fig. 66 located on both sides of handle
(B) must be pressed at the same time
(in opposing manner), and the handle
must be slid downwards.
To carry out window height adjustment,
from the top to the bottom, the grip
(B) must be slid (without pressing
anything).
66
F1B0103C
Always adjust the height of the seat
belts to fit the person wearing it: this
precaution could greatly reduce the risk
of injury in the event of a crash.
Correct adjustment is obtained when
the belt passes approximately half way
between the shoulder and the neck.
WARNING
70)
Never press button (C) when travelling.
71) Remember that in the event of an
accident, the rear seat passengers not
wearing seat belts are exposed to a very
serious risk and also represent a serious
danger for the front seat occupants.
72) Make height adjustment of the seat
belts when the car is stationary.
73) After the height adjustment, always
check that the grip is locked in one of the
preset positions. To do this, with button
(A) released, press downward more to
allow the anchoring device to click if it has
not been released in one of the possible
positions.
SBR (SEAT BELT
REMINDER) SYSTEM
The SBR system (f present) warns the
front and rear seat occupants if their
seat belt is not fastened.
The system signals unfastened seat
belts with visual warnings (warning light
on the instrument panel and symbols
on the display) and an acoustic signal
(see the following paragraphs).
NOTE To deactivate the acoustic
warning permanently go to a Fiat
Dealership. The acoustic warning can
be reactivated at any time through
the display Menu (see the "Display"
paragraph in the “Knowing the
instrument panel” chapter).
FRONT SEAT BELT
WARNING LIGHT
BEHAVIOUR
When the ignition device is turned to
MAR, warning light
(see fig. 67)
lights up for a few seconds, regardless
of the status of the front seat belts.
At speeds under 20 km/h, if the driver
side seat belt or the passenger side
seat belt (with occupant present) is
unfastened, the warning light stays on
constantly.