Fiat 500x, Руководство пользователя

Страница: 30 / 272

GETTING TO KNOW YOUR CAR
28
31
F1B0041C
The lights switch on/off gradually.
Switch (C) switches on/off light (B).
Switch (D) switches on/off light (E).
Ceiling light timing
On certain versions, to facilitate getting
in/out of the car at night or in poorly-
lit areas, two timed modes have been
provided:
Timing while getting into the car
Timing while getting out of the car.
WINDSCREEN
WIPER/REAR
WINDOW WIPER
Operation is only possible with the
ignition device at MAR.
WINDSCREEN WIPER /
WASHER
Operation
7) 8)
21)
The ring (A) fig. 32 can be set to the
following positions:
screen wiper off.
fixed intermittent wipe (slow)
intermittent flick linked to the speed
LO constant slow wipe
HI constant fast wipe
MIST function
32
F1B0635C
Move the stalk upwards (unstable
position) to activate the MIST
function: operation is limited to the
time for which the stalk is held in this
position. When released, the stalk will
return to its default position and the
windscreen wiper will be automatically
stopped.
IMPORTANT This function does not
activate the windscreen washer;
windscreen washer fluid will not
therefore be sprayed onto the
windscreen. To spray windscreen
washer fluid onto the windscreen, the
washing function must be used. With
the ring nut (A) fig. 32 in position ,
the screen wiper is not activated. In
position , the pause time between
the strokes of the screen wiper is 10
seconds, independently of the car
speed. In position , the pause time
between two strokes is set according
to the vehicle speed: when the speed
increases, the time between two
strokes decreases. In position LO
or HI , the windscreen wiper moves
continuously, i.e. without a pause
between two strokes.
"Smart washing" function
Pull the stalk towards the steering
wheel (unstable position) to operate the
windscreen washer.
When the stalk is held pulled for longer
than half a second, the windscreen
wiper moves with active control.