Fiat 500x, Руководство пользователя

Страница: 29 / 272

27
The direction indicator on the side
selected will be activated for 5 flashes
and then go out automatically.
COURTESY LIGHTS
With the ignition device in the MAR
position, this function can be used
to activate the side/tail lights and the
number plate lights for 25 seconds
whenever the doors are unlocked using
the remote control or the Keyless Entry
function.
The courtesy light function can be
adjusted through the display Menu or
the Uconnect™ system.
The function is automatically disabled
once the activation time elapses (25
seconds), or when the car doors are
locked again, or by turning the ignition
device to a position other than MAR.
HEADLIGHT ALIGNMENT
ADJUSTMENT
Headlight alignment corrector
The headlight alignment corrector
operates with ignition device at MAR
and dipped headlights on.
Turn the ring (A) fig. 30 to adjust.
Position 0
: 1 or 2 occupants on
front seats;
Position 1 : 4 or 5 occupants
Position 2 : 4 or 5 oc load
in the boot
Position 3 : maximum
admissible load stowed only in the
luggage compartment.
30
F1B0207C
IMPORTANT NOTE Check the
headlight position every time the load
weight is changed.
INSTRUMENT PANEL
AND CONTROL BUTTON
GRAPHIC BRIGHTNESS
ADJUSTMENT
With side lights or headlights on, turn
ring nut (B) fig. 30 upwards to increase
light brightness of the instrument panel
and of the control button graphics,
or turn the ring nut downwards to
decrease it.
WARNING
19) The daytime running lights are an
alternative to the dipped headlights while
driving during the daytime in countries
where it is compulsory to have lights on
during the day; where it is not compulsory,
the use of daytime running lights is
permitted.
20) Daytime running lights cannot replace
dipped beam headlights when driving
at night or through tunnels. The use
of daytime running lights is governed
by the highway code of the country in
which you are driving. Comply with legal
requirements.
INTERIOR LIGHTS
FRONT CEILING LIGHT
Switch (A) fig. 31 is used to switch
on/off the ceiling light bulbs.
Switch positions (A):
central position: lights (B) and (E)
switch on/off when the doors are
opened/closed;
pressed to the left (OFF): lights (B)
and (E) are always switched off;
pressed to the left ( ): lights (B)
and (E) are always switched on.
"Lane Change" function
To indicate a change of lane with the
car moving, move the left lever to the
non-stable position for less than half a
second.