Festo YXCR Скачать руководство пользователя | Manualshive

Страница: 18 / 108

background image

18

Festo — YXCR — 2021-07b

Transport

5.2

Remove transportation locks from the transportation protection

The product is secured to the transportation protection with transportation locks to prevent the
product from slipping during transport.

WARNING

Danger of crushing due to falling transportation protection.
When lifting the product, the transportation protection can loosen and fall down.
• Before lifting the product, remove the transportation locks that secure the product to the transpor-

tation protection.

Fig. 17: Identification of the transportation lock for attachment to the transportation protection

1. Before removing the product: remove the marked screws.

Ä

The product can be lifted out of the transportation protection.

2. Lift the product out of the transportation protection with the mounted transport kit

the product with the transport kit.

Transportation locks for moving parts

CAUTION

Risk of injury from unsecured moving parts of the product.
Moving parts may break free and run uncontrollably to the end position at high acceleration.
• Before handling the product, check that the moving parts of the product are secured with transpor-

tation locks.

• Secure unsecured moving parts with transportation locks.

Fig. 18: Identification of the transportation lock for moving parts

•

Do not remove the marked transportation locks for the moving parts until the product has been
mounted.

«
...
16
17
18
19
20
...
»

Содержание YXCR













































































































Отзывы:

Нет отзывов

Похожие инструкции для YXCR

Бренд: Kawai Страницы: 10

Бренд: Parker Research Corp Страницы: 4

Бренд: Eastwood Страницы: 20

Бренд: Daihan Scientific Страницы: 43

Бренд: Kamikaze Страницы: 112

Бренд: KAM Страницы: 2

Бренд: Bartscher Страницы: 20

Бренд: Bartscher Страницы: 24

Бренд: H&S Страницы: 32

Бренд: Abus Страницы: 8

mocon AQUATRAN 3/38

Бренд: Ametek Страницы: 85

Бренд: ProLights Страницы: 28

Бренд: Hella Gutmann Страницы: 48

Бренд: TECshow Страницы: 22

Бренд: DALBO Страницы: 27

Infinity Wash XL

Бренд: Coemar Страницы: 6

Бренд: Cleaver Scientific Страницы: 41

Бренд: WESTEK Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды