Festo Smart cubic CPV-SC Series, Руководство пользователя

Страница: 59 / 80

5. Maintenance and conversion
5-3
Festo P.BE-CPVSC-EN en 0112NH
5.1 Cleaning/replacing the large-area silencer
Caution
Dirt in the large-area silencer can cause an increase in
pressure in the exhaust channel.
•
Clean the silencer insert if it is yellow/black or a dark
colour or replace it by a new one.
•
Do not use TRI for cleaning, but benzine or paraffin.
In this way you can ensure that the large-area silencer
functions correctly and that the valves operate correctly.
Proceed as follows:
1. Loosen and remove the screws in the fastening frame.
2. Remove the silencer insert from the end plate.
3. Replace the silencer insert or clean it.
4. Place the cleaned or the new silencer insert and the
fastening frame on the end plate.
5. Fasten the silencer insert only with the original screws
(see table).
Fastening screws of the silencer insert
Torx T6, strength class 10.9
Valve terminal Screw Tightening torque
CPVSC1 M 2 x 5.5 0.4 + 0.1 Nm