Festo Smart cubic CPV-SC Series, Руководство пользователя

Страница: 51 / 80

4. Commissioning
4-9
Festo P.BE-CPVSC-EN en 0112NH
Actuating the manual override with automatic reset
(non-locking) Reaction of the valve
Use a screwdriver to carefully
press down the plunger of the
manual override as far as pos-
sible. The valve:
– Moves to the switching
position
Hold the plunger of the manual
override pressed down. – Remains in the switch
position
Release the plunger. The
spring resets the plunger of
the manual override to the
starting position. – Moves back to the basic
position ( not with 5/2-way
double-solenoid valve,
Ident. Code J)
Caution
Before commissioning your machine/system:
•
Make sure that double-solenoid valves (Ident. Code J)
are in their basic positions again. To do this actuate
manual override 12 of the relevant valve or apply current
to pilot solenoid 12.
•
Bring the locking manual override actuations into the
basic position again.
In this way you will avoid undefined switching states when
commissioning the machine/system.