Festo MPS 8049013, Начало работы

Страница: 48 / 124

Storage station
48
© Festo Didactic 8049748
8.3 Feed and holding unit assembly
1 Through-beam sensor
2 Inductive sensor
3 Diffuse sensor
4 Holding unit
Workpieces are fed to the feed and holding unit either manually or from an upstream station.
An opto-electrical sensor monitors the end position of the workpieces in the holder. From this position, the
workpiece can be picked by the planar surface gantry with pneumatic gripper.
The color of the workpieces is detected during the feed process by combining three sensor signals.
A black workpiece is detected when:
• The through-beam sensor indicates a rising edge and
•
The diffuse sensor does not respond
A red workpiece is detected when:
• The through-beam sensor indicates a rising edge and
•
The diffuse sensor indicates a rising edge
A silver workpiece is detected when:
• The inductive proximity sensor indicates a rising edge
A transparent workpiece is detected when:
•
The through-beam sensor indicates two rising edges