Storage station
60
© Festo Didactic 8049748
11.8.2
Starting automatic operation
Each time a start occurs, the planar surface gantry is homed by the station’s controller. During homing, the
planar surface gantry travels automatically to the uppermost right-hand point within its limitations.
Caution
Risk of injury and damage to property due to uncontrolled motion of the connected
actuators.
•
Remove all objects from the travel path and do not reach into the planar surface gantry’s work space.
After all start-up prerequisites have been fulfilled, the red reset LED blinks at the control console.
Start procedure
1.
Press the “Reset” key.
Homing of the planar surface gantry is started, after which the gripper is advanced to its initial position.
If homing is successful, the green start LED lights up.
2.
Select the store or issue mode:
Store mode – turn the key switch to the vertical position.
Issue mode – turn the key switch to the horizontal position.
3.
Press the “Start” key.
The station is now ready and automatically detects a part in the holding unit.
Note
If the planar surface gantry doesn’t automatically travel to the uppermost right-hand point within its
limitations with the gripper during homing, homing must be repeated (Press the “Reset” key).
If it’s not possible to repeat homing, remove the station from operation and contact customer
service.
Содержание MPS 8049013
Страница 123: ......
