Festo HGPPI Series, Инструкция по эксплуатации

Страница: 159 / 192

6. Diagnosis and trouble shooting
6−19
Festo P.BE−HGPPI−PB−EN en 0605NH
6.4.5 Malfunction group 3: Execution error
Execution errors are errors that may occur when a command
is started. For these malfunctions, the following applies: The
malfunction can be acknowledged by function 1 (reset). After
wards, the corrected command can be executed.
Error
word Fl as he s De sc ription Error h a ndlin g
E3.01 2x Command contains impermissible
function or jaw address.
·
Check whether the function is
permissible.
·
Check whether the jaw bits are
correctly set in accordance with
the function number.
E3.02 2x Function 3/4 (read/write):
Addressed parameter number
does not exist.
·
Check the parameter number and
correct it.
E3.03 2x Function 3/4 (read/write):
Addressed subindex does not exist.
·
Check the subindex and correct it.
E3.04 2x Function 3 (write):
Parameter is READ ONLY. No write
access allowed.
·
Check whether the correct para
meter address was entered.
·
Check whether the parameter is
to be read (function 3).
E3.05 2x Function 3/4 (read/write):
Access not allowed: The parameter
can be neither read nor written.
·
Check whether the correct para
meter address was entered.
E3.06 2x Function 3 (write): Parameter value
outside the permitted limits.
·
Correct the parameter.
E3.07 2x Position and/or force setpoint value
outside of the limits defined by the
user.
·
Check the setpoint value and
correct it.
·
Check the setpoint value limit in
the parameter data and correct,
if necessary, and re−establish
PROFIBUS communication.
Table6/14: Execution errors