Festo CPX-AP-I-PB-M12, Инструкции и эксплуатация

Страница: 22 / 30

Station status 2
Bit Contents Meaning (bit set)
0 Diag.Prm_Req The master must reconfigure the automation system
CPX-AP.
1 Diag.Stat_Diag The master must request diagnostic data until this bit is
set to 0.
2
–
always 1
(fixed by the automation system CPX-AP)
3 Diag.WD_On The response monitoring (watchdog) is activated.
4 Diag.Freeze_Mode The Freeze control command is activated.
5 Diag.Sync_Mode The Sync control command is activated.
6 Reserved
–
7 Diag.Deactivated always 0
(fixed by the automation system CPX-AP)
Tab. 24 Station status 2
Station status 3
Bit Contents Meaning (bit set)
0
…
6 Reserved
–
7 Diag.Ext_Diag_Overflow The automation system CPX-AP has more diagnostic
messages than can be buffered or the master receives
more diagnostic messages than it can buffer.
Tab. 25 Station status 3
Diagnostics and fault clearance
22 Festo — CPX-AP-I-PB-M12 — 2020-03