Festo CPX-AP-I-PB-M12, Инструкции и эксплуатация

Страница: 15 / 30

ID hex (dec) Message Description
The system starts.
Remedy
–
0B
|
00
|
0140
(184549696)
System start
Diagnost-
ic status Information
Firmware invalid
Remedy – Repeat transmission of firmware package.
0B
|
04
|
00B7
(184811703)
Firmware invalid
Diagnost-
ic status Error
The version of the Diagnostic Full Image is not supported.
Remedy – Check and adjust firmware versions of
master and devices.
0B
|
08
|
018F
(185074063)
Unsupported Full Dia-
gnostic Image version
Diagnost-
ic status Error
The diagnostic version is not supported.
Remedy – Check and adjust firmware versions of
master and devices.
0B
|
08
|
0190
(185074064)
Unsupported dia-
gnostic version
Diagnost-
ic status Error
Initialisation of the device failed.
Remedy – Check whether additional diagnostic mes-
sages are pending.
– Reset device to factory settings.
0B
|
07
|
00CC
(185008332)
Initialisation failed
Diagnost-
ic status Error
The device description file stored in the device at the fact-
ory is invalid or missing.
Remedy – Restart device.
– Check AP system communication.
– Check firmware version.
– In the event of repeated errors, contact
Festo Service.
0B
|
09
|
0128
(185139496)
APDD invalid
Diagnost-
ic status Error
Diagnostics and fault clearance
15 Festo — CPX-AP-I-PB-M12 — 2020-03