Festo CPA-SC Series, Руководство пользователя

Страница: 52 / 140

2. Fitting
2−12
Festo P.BE−CPASC−EN en 0808c
2.4 Fitting/dismantling the manual override cap
If cover caps are fitted, the function of the manual override
will be limited.
With the cover cap VMPA−HBT−B the manual override will
be limited to the non−locking function.
With the cover cap VMPA−HBV−B the manual override will
be completely covered so that it is not possible to actuate
the manual override.
Fitting Proceed as follows:
1. Make sure that the relevant manual overrides are in a
non−actuated state. If necessary, set locking manual
overrides to the basic position (see chapter 4, Tab.4/5).
2. Place the cap on the manual override so that the snap
hooks of the cover can grip into the recess on the manual
override.
3. Press the cover cap into the grooves on the manual
override (see Fig.2/5):