Festo CPA-SC Series, Руководство пользователя

Страница: 76 / 140

3. Installation
3−22
Festo P.BE−CPASC−EN en 0808c
Sizes of the pneumatic connections
Fit the screw connector or the silencers according to the table
below. Then connect the tubing.
Note
If the valve terminal is fitted with more than 8 valves which
are switched at the same time, a silencer or exhaust lines
must be connected to both connections (82/84).
Valve terminal CPA−SC
Tubing Connection
code (ISO 5599) Connection
code (ISO 228) Connection
1)
Compressed air/
vacuum (1) G1/8" Screw connector on both sides of the
base block
External pilot
air supply (12/14) M5 Screw connector on both sides of the
base block
Exhausting the
valves (3) or (5) G1/8" Screw connector on both sides of the
base block
for ducted exhaust air
for silencer
Exhausting the
pilot air (82/84) M5 Screw connector on both sides of the
base block
for ducted exhaust air
for silencer
Work air/
vacuum (2/4) M5 With sub−base valves screw
connector on base block
With semi−inline valves screw
connector on the valve
Pressure
compensation (L) M3, M5 Screw connector on both sides of the
base block
The pressure compensation hole must
not be sealed with a blanking plug.
1)
Depending on what you have ordered, the CPA−SC may already be fitted with QS screw connectors.
Tab.3/3: Valve terminal CPA−SC: Assigning the connections