Festo CPA-SC Series, Руководство пользователя

Страница: 33 / 140

1. Summary of components
1−17
Festo P.BE−CPASC−EN en 0808c
1.2.3 Ident. code of the pneumatic components
On the basis of the identification code, you can ascertain the
valve plates with which your CPA valve terminal or individual
location base block is fitted. This code is printed on the front
of the valve plate.
Ident. code Pneumatic components
2/2−way valves:
I Two 2/2−way valves, closed in basic position, control side (14) reversible
With dual−pressure operation: Operating pressure via connections (1) or
connection (5)
With vacuum operation: operating pressure via connection (1), vacuum at
connection 5 (e.g. for vacuum switching with reject pulse)
See also the instructions in the section 3.3.2 Pressure zone separation and
section3.3.3 Vacuum/low pressure operation, as well as in appendix A.3.
3/2−way valves:
K Two 3/2−way valves, normally closed
N Two 3/2−way valves, normally open
X 3/2−way valve, in basic position closed, external pressure supply
(
not intended in combination with the individual location base block)
5/2−way valves:
J 5/2−way valve, double solenoid
M 5/2−way valve, single solenoid
5/3−way valves:
B 5/3−way valve, open in mid−position
E 5/3−way valve, mid−position exhausted
G 5/3−way valve, mid−position closed
Tab.1/12: Ident. code of the valve location components
Further information on the valve plates can be found in
appendix A.