Festo 8060571, Инструкции по ремонту

Страница: 28 / 52

28 / 52 Festo 7ELCC_TB_KFb_en
3. Push the toothed belt into the clamping component modules (2x).
4. Align the toothed belt axially centred with the clamping component
modules (2x).
5. Push the clamping plates (2x) in the clamping component modules (2x)
onto the toothed belt.
6. Push the clamping plates (2x) against the stop (A) of the clamping compo-
nent modules (2x).
– In the case of ELCC-TB-KF-60 / 70, the clamping plate is pressed into the
clamping component module by
one
grub screw.
– In the case of ELCC-TB-KF-90 / 110, the clamping plate is pressed into the
clamping component module by two grub screws.
7. Clean the grub screws (2x) or (4x) to remove locking agent.
8. Wet the grub screws (2x) or (4x) with locking agent.
9. Screw the grub screws (2x) or (4x) into the clamping component mod-
ules (2x) and tighten to the appropriate tightening torque (

Table).
Type Tightening torque
ELCC-TB-KF-60 0.5 Nm ± 10 %
ELCC-TB-KF-70 0.5 Nm ± 10 %
ELCC-TB-KF-90 0.5 Nm ± 10 %
ELCC-TB-KF-110 0.5 Nm ± 10 %