Festo 8060571, Инструкции по ремонту

Страница: 44 / 52

44 / 52 Festo 7ELCC_TB_KFb_en
Structure of the measuring tape
1
Cover strip
2
Adhesive tape
3
Adhesive tape
4
Cylinder barrel module
5
Steel strip
6
Adhesive tape
7
Magnetic strip
The magnetic strip
7
is already attached via an adhesive tape
6
to a steel
strip
5
(= carrier side) in the factory.
1
4
3
2
7
6
5
7. Stick the adhesive tape
3
onto the steel strip (= carrier side)
5
.
8. Adjust the magnetic strip with the steel strip to the middle of the cylinder
barrel module. A size‑specific distance L from the ends of the cylinder barrel
module must be maintained (

Table):
Type Distance L to the end cap
ELCC-TB-KF-60 44 mm
ELCC-TB-KF-70 49 mm
9. Adjust the magnetic tape with the steel strip on the cylinder barrel with a
size‑specific distance
H
from the front edge (= from the cylinder barrel edge
facing away from the drive head) of the cylinder barrel module (  Table):
Type Distance
H
to the front edge of the cylinder barrel
module
ELCC-TB-KF-60 39.5 mm
ELCC-TB-KF-70 60.5 mm
10. Stick the magnetic strip on the cylinder barrel module.
The easiest way is to stick on the magnetic strip in two steps:
1. Remove half the protective film from the adhesive tape.
2. Stick on the magnetic strip corresponding to the removed film.
3. Remove the remaining length of the protective film from the adhesive
tape.
4. Stick on the whole length of magnetic strip.