Festo 8060571, Инструкции по ремонту

Страница: 37 / 52

37 / 52 Festo 7ELCC_TB_KFb_en
4. Push the cover plate, with the matt side facing upwards, into the slide
module.
At the top belt reversals:
– the ELCC-TB-KF-60 has
one
compression spring mounted on each.
– the ELCC-TB-KF-70 / 90 / 110 has two compression springs mounted on
each.
5. Place the compression springs (2x) on the trunnion (2x) of the top belt
reversals (2x).
6. Position the top belt reversals (2x) on the right and left of the slide module.
7. Position the cover cap in the correct position on the compression springs.
8. Push down the compression springs by pressing the cover cap.
9. Push the cover cap with top belt reversal completely into the slide module.
10. Repeat steps for second cover cap.
11. Clean socket head screws (2x) to remove locking agent.
12. Wet the socket head screws (2x) with locking agent.
13. Screw the socket head screws (2x) through the cover cap and tighten to the
appropriate tightening torque (  Table).
Type Tightening torque
ELCC-TB-KF-60 1.2 Nm ± 10 %
ELCC-TB-KF-70 1.2 Nm ± 10 %
ELCC-TB-KF-90 1.2 Nm ± 10 %
ELCC-TB-KF-110 1.2 Nm ± 10 %
14. Repeat steps for second cover cap.