Festo 3013388, Руководство по эксплуатации

Страница: 33 / 40

EGC−...−BS−KF−...
Festo EGC−...−BS−KF−... 0808a English
33
Note
The lubrication intervals S
int
depend on the actual stress on the EGC.
S
Shorten the lubrication intervals S
int
( è Fig.19) to half the length in case of:
Dusty and dirty environments
Nominal strokes>2000mm
Travel profile
Z
triangular operation (frequent acceleration and braking)
Ambient temperatures>40°C
EGC which has been in operation>3years.
We recommend that you lubricate the recirculating ball bearing guide and
the bearing guide at the same time. The shorter lubrication interval applies
in this case.
S
Grease the following components:
Electric
cylinder with
ball screw Bearing
guide Cover strip Guide rail
Lubrication point
(
è Fig.1)
Lubrication
nipple
aA
Lubrication
hole
aB
Surface
3
Surface
4
Lubrication interval è Fig.19 As necessary
1)
Grease
2)
Roller bearing grease
1) Or if the component no longer has a layer of grease
2) Grease gun, blast pipe and grease
è Chapter 10 Accessories"
Fig.18
To grease the recirculating ball bearing guide :
1. Calculate the spindle comparison number
SP
ver
(
Z
F
ver
in Fig.19) using the following
formula and take the lubrication interval S
int
from Fig.19.
SP
ver
+
|Fx|
Fx
max
v
1
2. Grease the EGC at the lubrication nipple
aA
.
3. Move the along the entire path of travel
whilst greasing so that the grease is distri
buted evenly.
Fig.19
Fig.20
aA