EGC−...−BS−KF−...
Festo EGC−...−BS−KF−... 0808a English
30
6
Commissioning
Warning
Moving masses can cause personal injury and
material damage (crushing).
S
Make sure that:
nobody can place his/her hand in the
positioning range of parts (e.g.using a
protective crate).
there are no objects in the positioning
range.
It should not be possible to touch the EGC
until the mass has come to a complete
stand.
Fig.14
1. Check travel
2. Homing run
3. Test run
Determining the direction of
movement of the motor
Adjusting the real situation
with the image in the
controller
Checking the complete
behaviour
Fig.15: Definitions
1. Start
check travel
with low dynamics.
In spite of equal control, even motors of the same type sometimes turn in
the opposite direction due to the circuitry.
The EGC has a spindle which turns clockwise: When the drive trunnion is
turned in clockwise, the slide moves in the direction of the motor.
2. Start
homing run
in accordance with the operating instructions for your motor
drive system with low dynamics up to the reference switch.
The homing run must only be performed against the reference switch.
3. Start
test run
with low dynamics.
4. Check whether the EGC fulfils the following conditions:
The slide must be able to move through the complete intended positioning
cycle.
The slide must stop as soon as it reaches a limit switch.
