EGC−...−BS−KF−...
Festo EGC−...−BS−KF−... 0808a English
27
Fitting in a vertical or sloping position
Warning
Masses falling suddenly can cause personal
injury and material damage (crushing). If
there is a power failure or if the spindle nut
breaks, the work load will fall.
S
Make sure that you only use motors with
an integrated spring−loaded holding brake.
S
Check whether external safety measures
are necessary to prevent spindle nut frac
ture (e.g.toothed latches, moving bolts or
an emergency buffer).
Installing the useful load
S
Place the useful load so that the break−
down torque of force F (parallel to the
axis of motion) and lever arm a" remains
low.
S
Fasten the useful load to the slide with
screws and centring sleeves.
S
Make sure that the maximum screw−in
depth D is adhered to.
EGC−...
70
80
120
185
Screw (side/top)
M5
M5/M6
M6/M8
Max. screw−in depth D
[mm]
8.4
9.5
10
15
Centring hole
[mm]
Ø5
Ø7/Ø9
Ø9
Tightening torque
[Nm]
5.9
5.9/9.9
9.9/24
Fig.10
Fig.7
Fig.8
a
F
Fig.9
