Festo 1971599, Руководство пользователя

Страница: 120 / 150

5. Diagnostics and error handling
5-4
Festo P.BE-CPX-FVDA-P2-EN en 1209NH English
5.2 Possible error messages of the output module CPX-FVDA-P2
Error
no. Operator unit
display Description Error handling
2
2)
[Short circuit] Short circuit/overload at the
output
•
Remedy short circuit
•
Acknowledgment and reentry
of the module or output
channel
3
3)
[Wire
break/idling
current I/O] Wire break
•
Check and, if necessary,
replace the cable and
connected actuators.
5
1)
[Undervoltage in
power supply] Undervoltage of the supply
voltage U
VAL
•
Eliminate undervoltage
•
Acknowledgment and reentry
of the module
61
1)
[Overvoltage in
power supply] Overvoltage of the supply
voltage U
VAL
•
Eliminate overvoltage
•
Acknowledgment and reentry
of the module
65
1)
[F_DEST_ADD
mismatch] The PROFIsafe address set by
the DIL switches does not agree
with the setting on the
PROFIsafe master
(F_DEST_ADD).
•
Check set address or
parameter F_DEST_ADD.
Correct address or send new
parameters.
66
1)
[F-Communicatio
n fault] Error in safe communication
•
Check F-Host
•
Acknowledgment and reentry
of the module
67
1)
[F-Communicatio
n timeout] Timeout in the PROFIsafe
transmission. The time sequence
of the PROFIsafe communication
is malfunctioning.
•
Check program in the F-Host
•
Check communication paths
•
Check timeout (parameter
F_WD_Time)
•
Acknowledgment and reentry
of the module
68
2)
[Leakage current] Cross circuit error (bypass circuit
error) at the output
•
Eliminate cross circuit
•
Acknowledgment and reentry
of the module or output
channel