Festo 1971599, Руководство пользователя

Страница: 104 / 150

3. Commissioning
3-14
Festo P.BE-CPX-FVDA-P2-EN en 1209NH English
3.5.2 Parameterisation and signal display with the operator unit
CPX-MMI-1
The universal operator unit CPX-MMI-1 offers convenient
functions which will support you in commissioning. With the
operator unit, you can view the CPX module parameters of
the module and change them, if necessary. For safety engin-
eering reasons, the PROFIsafe parameters of the module can-
not be influenced with the operator unit.
General information on the operator unit and on commission-
ing the CPX terminal using the operator unit can be found in
the description P.BE-CPX-MMI-1-... .
Knowledge of the basic functions of the operator unit are
assumed in the following.
In the main menu of the operator unit, the name for the out-
put module [FVDO-P2 Output Module Safety] is displayed.
The short text [FVDO-P2] is shown in the header of the operat-
or unit. An example is shown in the figure below:
System overview
CPX terminal
0: FB34-RIO Profinet Remote I/O
1: 2AI Analogue Input Module
2: 2AI Analogue Input Module
3: FVDO-P2 Output Module Safety
Diag <--> OK
<-
3: FVDO-P2
->
Monitoring (M)
Diagnostics (D)
Parameters (P)
Module data (MD)
Back OK
1 2
1
Module identifier in the main menu
(here as third module)
2
Module identifier in the header of the
system sub-menu for a module
Fig. 3/1: Module identifier of the output module CPX-FVDA-P2 at the operator unit