Ferrari 575M Superamerica, Руководство пользователя

Страница: 62 / 166

62
3
Q
S R
ABOUT YOUR VEHICLE
The symbol Q will appear on the multi-
function display.
The system will take a maximum of
20 minutes to complete the setting
procedure with the vehicle in motion.
If the difference in pressure between the
wheels on the same axle exceeds 0.4 bar,
the system will not calibrate.
If the system detects a pressure drop
during calibration, the relevant symbol
will appear on the multi-function display
(see on page 49).
Multi-function display scroll buttons
The multi-function display scroll buttons
can be activated only with the ignition
key in position
II.
By default, the time is displayed on the
multi-function display on the instrument
panel.
Briefly press (less than 2 seconds) the
left-hand button
R to sequentially switch
between the various functions shown on
the display:
• outside temperature
• LH front tyre pressure (FL)
• RH front tyre pressure (FR)
• RH rear tyre pressure (RR)
• LH rear tyre pressure (RL).
If one or more alarm symbols illuminate
on the multi-function display, briefly
press the LH button
R to access the
above mentioned functions, using the
same procedures, but in the following
sequence:
•
clock
•
outside temperature
•
LH front tyre pressure (FL)
•
RH front tyre pressure (FR)
• RH rear tyre pressure (RR)
• LH rear tyre pressure (RL).
Press the left-hand button R at length
(more than 2 seconds) to access the
programming mode, where you can
scroll the options by briefly pressing the
LH button
R .
Four options are available:
• adjusting the instrument panel
brightness
• turning the clock ON/OFF
• setting the hours
• setting the minutes.