FENIX IMVICO
TK23 OPERATION MANUAL
67/81
____________________________________________________________________
APPENDIX C – RECOVERY FROM AUTOCUTTER ERROR
____________________________________________________________________
•
If a foreign object, such as a push pin or paper clip, drops in the autocutter and
causes the autocutter to lock up, the printer enters an error state and begins the
recovery operation automatically.
If the problem is not serious, the autocutter returns to its normal position without any
intervention by the user.
If the autocutter does not return to its normal position by itself, turn the printer off.
Insert a Phillips screwdriver through the slot as shown in
figure C.1
and into the
screw in the worm gear of the motor axis. Then, turn the screw until blade retreats.
•
If you cannot rotate the motor gear, rotate it in the reverse direction to loosen it; then
press the paper feed button. Open the platen unit
(see pag. 7
-
figure a)
, remove
the jammed paper, and reinstall the paper roll. Then close the platen unit.
Figure C.1-
Printer mechanism. Front view.
Insert Phillips
screwdriver and
turn it till blade
retreats
