FENIX IMVICO
TK23 OPERATION MANUAL
28/81
3.2 - PUSH BUTTONS AND LED
The buttons and led are placed in the topside of the printer, identified as follows:
3.2.1 - BUTTONS FUNCTIONS
1)
PFEED Button
.
Functions:
•
If pressed on start-up, it activates the
SELF-TEST MODE.
•
If pressed together with PROG button on start-up, they activate the
HEXADECIMAL MODE
.
•
During
PROGRAMMING MODE
this is the
“YES”
button.
•
If pressed when the printer is already started, its function depends on whether
the OM (Optical Mark) sensor is enabled or not.
•
When the OM (Optical Mark) sensor is disabled, the printer feeds
paper continuously while pressing the PFEED button.
•
When the OM sensor is enabled, the printer will feed paper by mark
paper unit.
•
Paper feeding using the paper FEED button cannot be performed under the
following conditions:
•
The paper roll end sensor detects a paper end.
•
When the printer thermal head is opened.
2)
PROG Button
.
Functions:
•
If pressed on start-up, it activates the
PROGRAMMING MODE
.
•
If pressed together with PFEED button on start-up, they activate the
HEXADECIMAL DUMP MODE
.
•
During
PROGRAMMING MODE
this is the
“NO”
button.
•
If pressed when the printer is already started, the TK23 removes paper from
inside the TK23 (if there is any), ready to use.
3.2.2 - LED INDICATOR
1) Power (POWER) LED:
ON: Power is stable.
OFF:
Power
failure.
"PFEED" button
"POWER ON" led
"PROG" button
