FENIX IMVICO
TK23 OPERATION MANUAL
51/81
GS B n
[Name]
Turn white/black reverse printing mode
[Format]
ASCII
GS B
n
Hex
1D
42
n
Decimal 29 66
n
[Range] 0
≤
n
≤
255
[Description] Turns on or off white/black reverse printing mode.
When the LSB of
n i
s 0, white/black reverse mode is turned off.
When the LSB of
n
is 1, white/black reverse mode is turned on.
[Notes]
•
Only the lowest bit of
n
is valid.
•
When white/black reverse printing mode is on, it also applied to character
spacing set by
ESC SP
.
•
This command does not affect bit image, user-defined bit image, bar code
and HRI characters.
•
This command does not affect the space between lines.
•
White/black reverse mode has a higher priority than underline mode. Even if
underline
mode is on, it is disabled (but not cancelled) when white/black reverse mode
is selected.
[Default]
n
= 0
GS FF
[Name]
Feed marked paper to print starting position
[Format] ASCII
GS
FF
Hex
1D 0C
Decimal 29 12
[Description] Feeds the marked paper to the print starting position.
[Notes]
•
This command is enabled only when the Optical Mark sensor is set to be
effective using PROGRAMMING MODE.
•
This command sets the next print position to the beginning of the line.
•
Even if this command is executed at the print starting position of the marked
paper, the printer does not feed the marked paper to the next print starting
position.
[Reference]
GS ( F
