FENIX IMVICO
TK23 OPERATION MANUAL
56/81
GS E n
[Name]
Select head control method.
[Format] ASCII
GS
E
n
Hex
1D
45
n
Decimal 29 69 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Selects the head control method.
Bit Off/On
Hex
Function
0-3 Off
00 Undefined
4
5
Specifies the print speed
6 Off 00 Undefined
7 Off 00 Undefined
Speed Level
Bit 5 Bit 4
Speed 1
0
0
High speed
Speed 2
0
1
Speed 3
1
0
Speed 4
1
1
Low speed
[Notes]
•
This command is effective only at the starting position of the line.
•
When the head elements are energized being divided into two, the maximum
printing speed in speed level 1 becomes 90mm/s.
•
When the print speed is set to maximum the energizing mode is automatically
set to non-divided print head energizing mode.
[Default]
Speed level 1
[Reference]
GS ( K 2 0 0 m, PROGRAMMING MODE
GS H n
[Name]
Select print position for HRI characters.
[Format]
ASCII
GS H
n
Hex
1D
48
n
Decimal 29 72
n
[Range]
n
= <00>H or
n
= <02>H
[Description] Selects the print position of HRI characters when printing a bar code.
n selects the print position as follows:
n Printing
position
<00>H Not
printed
<02>H
Below the bar code
[Notes]
•
HRI indicates Human Readable Interpretation
•
HRI characters are printed using X-scale = 1, Y-scale = 1 and the font
specified by
GS f.
[Default]
n
= <02>H
[Reference]
GS f, GS k
